• Black 3D-printed cross stitch box with a pink and orange moth design stitched into the perforated lid, shown slightly open on a white surface with dried flowers around it.
  • Four-panel collage of 3D-printed cross stitch boxes in pink, yellow, green, turquoise, black, and red, each with a floral or moth design stitched into the perforated lid, shown open and closed in styled tabletop settings.
  • Hand holding a pink 3D-printed cross stitch box, showing the perforated stitch-ready grid lid up close, against a bright yellow background. Text reads Stitch-ready grid lid, approximately Aida 11 spacing.
  • Red 3D-printed cross stitch box with a strawberry design stitched into the perforated lid, labeled with dimensions 5.5 cm / 2.17 in wide, 6.5 cm / 2.56 in tall, 3.2 cm / 1.26 in deep. Text reads Box dimensions.
  • Two light green 3D-printed cross stitch box pieces side by side: the stitchable lid with a design partly stitched into the perforated grid, and the clip-in cover that slots inside to hide the grid and thread ends. Text reads Stitch your design, Insert clip to cover the grid.
  • Two finished 3D-printed cross stitch boxes: a pink box with a blue and green floral design stitched into the lid, shown against purple flowers, and a teal box with a purple and orange moth design, held in hand outdoors.
  • Light green 3D-printed cross stitch box shown open on moss, one part holding embroidery floss and thread spools, the other with a purple flower and pot design stitched into the perforated lid.
  • Light purple 3D-printed cross stitch box with a Frida-inspired portrait design stitched into the perforated lid, surrounded by bobbins of embroidery floss in green, yellow, purple, and blue on a wood surface.
  • Two finished 3D-printed cross stitch boxes side by side: a lavender box with a Frida-inspired portrait design nestled in green moss, and a light green box with a purple flower and pot design on a wood surface.
1 10

GoodStrings

Small Cross Stitch Box STL – Commercial License

Small Cross Stitch Box STL – Commercial License

€31.00
€31.00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Small Cross Stitch Box STL – Commercial License

The commercial-license version of our small stitchable keepsake box. Print this cross stitch box and sell what you make, under a 12-month commercial license.

Stitch directly into the perforated lid - no fabric or hoop needed. When you're done, the clip-in cover slides inside the lid to hide all your thread ends for a clean, finished box. This is an original GoodStrings design - the same box we make and sell as a finished product in our home studio.

This is a digital download. No physical item is shipped.

Commercial license - at a glance

You may: sell finished stitched pieces online and worldwide · sell blank prints in person · use a print service for your own orders · include them in your own subscription box.

You may not: sell blank prints online on their own · sell or share the files · sell wholesale · exceed 150 units per design.

Term: 12 months · Limit: 150 finished products · Files supplied without the GoodStrings mark.

Read the full commercial license →

What You'll Receive

  • 3 STL files - box, lid, and clip-in cover (supplied without the GoodStrings mark)
  • 1 3MF file - pre-configured for Bambu Studio
  • Read Me First PDF - quick overview before printing
  • Basic Print Settings PDF - tested settings and orientation guide
  • Commercial License PDF

Thread, needles, and embroidery patterns are not included. Embroidered designs shown in the photos are examples only.

Box Details

  • Box size: 5.5 × 6.5 × 3.2 cm / 2.17 × 2.56 × 1.26 in
  • Stitching area: 4 × 5 cm / 1.57 × 1.97 in
  • Approximate stitch count: 19 × 24
  • Grid spacing: Similar to Aida 11 - approximately 11 stitches per inch
  • Recommended: 3-4 strands of embroidery floss with a size 26 needle
  • Thread ends: Removable clip-in cover slides inside the lid to hide thread ends
  • Supports: Not required
  • Approximate filament use: 43 g per box

The files include all three printed parts: the box body, the stitchable lid, and the clip-in cover.

Resizing the file resizes the entire grid. It will not add stitches, and the spacing may no longer match Aida 11.

Tested Print Setup

  • Printers: Bambu Lab P1S and Bambu Lab X2D
  • Nozzle: 0.4 mm
  • Slicer: Bambu Studio - settings are pre-loaded in the .3mf file
  • Material: PLA only
  • Filaments tested: Bambu PLA Matte and SUNLU PLA Meta
  • Layer height: 0.2 mm
  • Wall loops: 2
  • Infill: 15%
  • Print orientation: Lid grid-side down, box body open side up, clip-in cover flat side down - pre-set in the .3mf file

Commercial License

This file is sold under the GoodStrings Commercial License: sell finished stitched pieces worldwide and blank prints in person, up to 150 units per design over a 12-month term. Commercial files are supplied without the GoodStrings mark. Full terms: Commercial License.

Just printing for yourself? The personal-use version is licensed for personal use only.

Don't Have a Printer?

Buy the finished box, printed and shipped by us: Small cross stitch box.

Instant Download

Files are available immediately after purchase. All sales are final once the files have been downloaded. Questions about your file? Message us - we're happy to help.

Pattern Credit

The stitched designs shown in the listing photos are not included.

Moth designs by NeedleLotDesigns.etsy.com.
Mini Frida design by kimlawrenceart.etsy.com.

View full details