• Eight 3D printed cross stitch keychain charms with bubble edges on green moss, stitched with a blue bird, a strawberry and a purple ghost, under an STL download banner.
  • Four-step photo guide: a stitched strawberry grid insert is clipped into a yellow bubble edge base, which hides the back and has a needle hole for swapping.
  • Hand holding a white blank keychain charm on moss, with notes pointing to the built-in hanging loop and the size: 3.9 x 3.5 cm with a 10 x 10 stitch grid.
  • Collage with a close-up of a red keychain charm stitched with a blue bird, plus a smooth white charm back, a navy ghost charm and a stitched strawberry insert.
  • Four lime and blue keychain blanks on wicker showing that grid inserts and bases swap, either in matching colors or mixed for a two-tone charm.
  • Six bubble edge keychain charms on a woven basket, four stitched with small pixel designs such as a blue bird and a strawberry, two in lime and blue left blank.
  • Close-up of bubble edge charms piled on moss: a pink one stitched with a strawberry, a red one with a blue bird, and blank green, yellow, white and brown ones.
  • Fingers holding a teal and purple cross stitch keychain with a yellow and orange stitched motif, in front of a tray of more printed blank charms.
  • Teal and purple two-tone keychain charms on a bright windowsill: one stitched with a yellow motif, one blank, and an empty base next to its loose grid insert.
  • Open palm holding a blue cross stitch keychain charm stitched with a small yellow pixel character, showing how tiny the finished charm is in hand.
  • Two red and yellow keychain charms with contrasting stitched motifs, styled on a set of car keys, shown hanging from a snail figurine and lying on blue stone.
  • FAQ graphic explaining this is a digital STL and 3MF download, with answers on included files, charm size, embroidery, the clip-in base, printers and personal use.
1 12

GoodStrings

Cross Stitch Keychain STL File – 3D Print Stitchable Keychain Charm

Cross Stitch Keychain STL File – 3D Print Stitchable Keychain Charm

€9.99
€9.99
Sale Sold out
Taxes included. Shipping calculated at checkout.

Printable STL files to 3D print your own mini cross stitch keychain charms. Each charm has two parts: a 10x10 stitchable grid insert and a bubble edge base with a built-in hanging loop. Stitch the insert, clip it into the base, and the back of your stitching is hidden - no felt, glue, or extra plastic canvas.

An original GoodStrings design - the same charm we make and sell as cross stitch keychain blanks in our home studio.

Digital download only. No physical item is shipped.

What you receive

  • STL files for the grid insert and the base
  • A Bambu Studio 3MF file
  • Read Me First, Basic Print Settings, and Personal Use License PDFs
  • Files are delivered as a PDF with a Google Drive link, since 3D print files are too large for direct download

Thread, needles, patterns, keyrings, and chains are not included.

Charm details

  • Size: about 3.9 × 3.5 cm / 1.5 × 1.4 in, including the loop
  • Grid: 10 × 10 stitches, 2.6 × 2.6 cm / 1 × 1 in
  • Grid spacing close to Aida 11 (about 11 stitches per inch)
  • Best with 3-4 strands of floss and a size 26 tapestry needle
  • Filament: 4.63 g per charm (insert and base)
  • Print time: approx. 41 min per charm

Print times are from a Bambu Lab P1S and will vary with your setup. Resizing resizes the whole grid and won't add stitches. The grid is already small, so scaling down can make the holes too tight for the needle.

Tested on

  • Bambu Lab P1S and X2D, Bambu Studio (settings pre-loaded in the 3MF)
  • PLA only - Bambu PLA Matte and SUNLU PLA Meta
  • 0.2 mm layers, 0.4 mm nozzle, 2 walls, 15% infill
  • Use the print orientation set in the 3MF file

Personal use

Print for yourself or as a gift - not to sell, use in classes or kits, or upload to MakerWorld, Thingiverse, Printables, or elsewhere. The charm is too small to carry our usual GoodStrings text mark, so these files come without it, but the personal license applies in full. Full terms: Personal Use License.

Good to know

Don't have a printer? Get cross stitch keychain blanks in sets of 10, 20, or 30, printed and shipped by us.

Want to sell what you make? The commercial license covers up to 1,000 charms over 12 months.

Instant download, all sales final once downloaded. Trouble with your files? Message us - we're happy to help.

View full details