• Eight 3D printed cross stitch keychain charms with bubble edges on green moss, three stitched with a bird, a strawberry and a ghost, under text reading "STL Download – Commercial".
  • Two red and yellow keychain charms with contrasting stitched motifs, styled on a set of car keys, shown hanging from a snail figurine and lying on blue stone.
  • Open palm holding a blue cross stitch keychain charm stitched with a small yellow pixel character, showing how tiny the finished charm is in hand.
  • Teal and purple two-tone keychain charms on a bright windowsill: one stitched with a yellow motif, one blank, and an empty base next to its loose grid insert.
  • Fingers holding a teal and purple cross stitch keychain with a yellow and orange stitched motif, in front of a tray of more printed blank charms.
  • Close-up of bubble edge charms piled on moss: a pink one stitched with a strawberry, a red one with a blue bird, and blank green, yellow, white and brown ones.
  • Six bubble edge keychain charms on a woven basket, four stitched with small pixel designs such as a blue bird and a strawberry, two in lime and blue left blank.
  • Four lime and blue keychain blanks on wicker showing that grid inserts and bases swap, either in matching colors or mixed for a two-tone charm.
  • Collage with a close-up of a red keychain charm stitched with a blue bird, plus a smooth white charm back, a navy ghost charm and a stitched strawberry insert.
  • Hand holding a white blank keychain charm on moss, with notes pointing to the built-in hanging loop and the size: 3.9 x 3.5 cm with a 10 x 10 stitch grid.
  • Four-step photo guide: a stitched strawberry grid insert is clipped into a yellow bubble edge base, which hides the back and has a needle hole for swapping.
1 12

GoodStrings

Cross Stitch Keychain STL – Commercial License

Cross Stitch Keychain STL – Commercial License

€39.00
€39.00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Cross Stitch Keychain STL – Commercial License

The commercial-license version of our mini cross stitch keychain charm. Print the charms in batches and sell what you make, under a 12-month commercial license that covers up to 1,000 charms.

Each charm has two parts: a 10x10 stitchable grid insert and a bubble edge base with a built-in hanging loop. Stitch the insert, clip it into the base, and the back of the stitching is hidden - no felt, glue, or extra plastic canvas. This is an original GoodStrings design, the same charm we make and sell as cross stitch keychain blanks in our home studio.

This is a digital download. No physical item is shipped.

Commercial license - at a glance

You may: sell finished stitched charms online and worldwide · sell blank charms in person · sell DIY kits in person, or online when they meet the kit rules · use a print service for your own orders.

You may not: sell blank charms online, even with a keyring attached · sell or share the files · sell wholesale · make more than 1,000 charms per term.

Term: 12 months · Limit: 1,000 charms · One charm (insert + base) counts as one unit.

Read the full commercial license →

What You'll Receive

  • STL files for the grid insert and the base
  • 1 3MF file - pre-configured for Bambu Studio
  • Read Me First PDF - quick overview before printing
  • Basic Print Settings PDF - tested settings and orientation guide
  • Commercial License PDF

Files are delivered as a PDF with a Google Drive link, since 3D print files are too large for direct download. Thread, needles, patterns, keyrings, and chains are not included.

Charm Details

  • Size: About 3.9 × 3.5 cm / 1.5 × 1.4 in, including the loop
  • Grid: 10 × 10 stitches, 2.6 × 2.6 cm / 1 × 1 in
  • Grid spacing: Similar to Aida 11 - approximately 11 stitches per inch
  • Recommended: 3-4 strands of embroidery floss with a size 26 needle
  • Construction: Two parts - grid insert and clip-in base with hanging loop
  • Approximate filament use: 4.63 g per charm (insert and base)
  • Print time: Approx. 41 min per charm

Resizing the file resizes the entire grid; it will not add stitches, and the spacing may no longer match Aida 11. The grid is already small, so scaling down can make the holes too tight for the needle.

Tested Print Setup

  • Printers: Bambu Lab P1S and Bambu Lab X2D
  • Slicer: Bambu Studio - settings are pre-loaded in the .3mf file
  • Material: PLA only
  • Filaments tested: Bambu PLA Matte and SUNLU PLA Meta
  • Layer height: 0.2 mm
  • Wall loops: 2
  • Infill: 15%
  • Print orientation: As set in the 3MF file

Commercial License

This file is sold under the GoodStrings Commercial License, with a production limit of 1,000 charms over a 12-month term instead of the usual 150 units. Sell finished stitched charms worldwide and blank charms in person. Adding a keyring, chain, or packaging does not make a charm finished, so unstitched charms may only be sold in person. Full terms: Commercial License.

Just printing for yourself? The personal-use version is licensed for personal use only.

Don't Have a Printer?

Buy the charms printed and shipped by us: cross stitch keychain blanks, in sets of 10, 20, or 30.

Instant Download

Files are available immediately after purchase. All sales are final once the files have been downloaded. Questions about your file? Message us - we're happy to help.

View full details