GoodStrings

Rectangle Cross Stitch Frame STL Files (Small + Large Bundle) – 3D Print Stitchable Embroidery Frame

€11.99

~~€19.98~~ €11.99

Sale Sold out

Taxes included. Shipping calculated at checkout.

Baroque Rectangle Cross Stitch Frame STL Files – Small and Large Bundle

3D print your own ornate stitchable embroidery frames at home, in both sizes.

Stitch directly into the built-in perforated grid - no fabric, hoop, or separate framing needed. Once finished, your embroidery is already displayed in a decorative baroque rectangle frame.

This is an original GoodStrings design - the same frame we make and sell as a finished physical product in our home studio, now available as a file you can print at home.

This bundle includes both sizes together. The sizes are also sold separately: small frame STL and large frame STL.

This is a digital download. No physical item is shipped.

What You'll Receive

Both sizes, small and large, together.

2 STL files - small and large baroque rectangle stitchable frames
2 3MF files - pre-configured for Bambu Studio
Read Me First PDF - quick overview before printing
Basic Print Settings PDF - tested settings and orientation guide
Personal Use License PDF

Thread, needles, and embroidery patterns are not included. Embroidered designs shown in the photos are examples only.

Frame Details

Small frame

Overall size: 15 × 11.5 cm / 6 × 4.5 in
Stitching area: Approx. 12.2 × 8.5 cm / 4.8 × 3.4 in
Approximate stitch count: 57 × 39
Thickness: 7.3 mm / 0.3 in
Approximate filament use: 41 g per frame

Large frame

Overall size: 25 × 19 cm / 9.8 × 7.5 in
Stitching area: Approx. 20 × 13.5 cm / 7.9 × 5.3 in
Approximate stitch count: 93 × 63
Thickness: 11.7 mm / 0.5 in
Approximate filament use: 128 g per frame

Both sizes

Grid spacing: Similar to Aida 11 - approximately 11 stitches per inch
Recommended: 3-4 strands of embroidery floss with a size 26 needle
Displays: Portrait or landscape
Frame construction: One solid frame piece each
Supports: Not required

No stand, backing, clip, hanging hole, or extra parts are included.

Resizing a file resizes the entire grid. It will not add stitches, and the spacing may no longer match Aida 11.

Tested Print Setup

Printers: Bambu Lab P1S and Bambu Lab X2D
Nozzle: 0.4 mm
Slicer: Bambu Studio - settings are pre-loaded in the .3mf files
Material: PLA only
Filaments tested: Bambu PLA Matte and SUNLU PLA Meta
Layer height: 0.2 mm
Wall loops: 2
Infill: 15%
Print orientation: Flat, with the back on the build plate

Personal Use License

You may print these frames for yourself or as personal gifts for family or friends.

You may not sell printed frames, include them in kits or classes, upload or share the files on MakerWorld, Thingiverse, Printables, or any other platform.

Personal-use files include a small GoodStrings text mark on the back of the frame. This mark may not be removed, covered, or altered.

Full license terms: read the Personal Use License.