• Close-up of a green 3D-printed ornate frame with a perforated stitching grid, embroidered directly with a yellow lemon and gingham border. Pink and yellow floral frames are layered behind it.
  • Three ornate 3D-printed cross stitch frames in yellow, pink, and green, shown with built-in perforated grids. The green frame is stitched with a lemon. Text reads “Stitch-ready grid surface” and “Approx. AIDA 11 spacing.”
  • Split image showing three ornate 3D-printed cross stitch frames nested in a woven basket, and a hand holding the finished small green frame embroidered with a lemon and yellow gingham border.
  • Split image showing the medium pink 3D-printed cross stitch frame displayed beside a woven basket and held up by hand. Its raised floral border and built-in perforated stitching grid are clearly visible.
  • Split image showing the large yellow 3D-printed cross stitch frame displayed upright and held by hand. The one-piece square frame has a dense perforated grid and a raised border of flowers, leaves, and berries.
  • Two close-up views of the yellow 3D-printed frame, highlighting the raised flowers, cascading leaves, layered inner molding, and perforated stitching grid. Part of the smaller pink frame appears in front.
  • Split image showing embroidery in progress and completed on the small green 3D-printed frame. Yellow gingham and a lemon are stitched directly into the perforated grid, with floss cards, a needle, and scissors nearby.
  • Three ornate square 3D-printed cross stitch frames stacked to compare the large yellow, medium pink, and small green sizes. The small frame features a stitched lemon, while the larger grids are blank.
1 11

GoodStrings

Floral Ornate Cross Stitch Frame STL Files (3 Size Bundle) – 3D Print Stitchable Embroidery Frame

Floral Ornate Cross Stitch Frame STL Files (3 Size Bundle) – 3D Print Stitchable Embroidery Frame

€17.99
€17.99
Sale Sold out
Taxes included. Shipping calculated at checkout.

Floral Ornate Cross Stitch Frame STL Files – Small, Medium and Large Bundle

3D print your own ornate stitchable embroidery frames at home, in all three square sizes.

Stitch directly into the built-in perforated grid - no fabric, hoop, or separate framing needed. Once finished, your embroidery is already displayed in a decorative floral frame.

This is an original GoodStrings design - the same frame we make and sell as a finished physical product in our home studio, now available as a file you can print at home.

This bundle includes all three sizes together.

This is a digital download. No physical item is shipped.

What You'll Receive

All three sizes, small, medium and large, together.

  • Download Link PDF - opens a Google Drive folder with the STL and 3MF files
  • 3 STL files - small, medium and large floral ornate stitchable frames
  • 3 3MF files - pre-configured for Bambu Studio
  • Read Me First PDF - quick overview before printing
  • Basic Print Settings PDF - tested settings and orientation guide
  • Personal Use License PDF

3D print files are large, so the STL and 3MF files are delivered through a Google Drive link inside a PDF rather than as a direct download. You will need to be able to open a PDF and download from Drive.

Thread, needles, and embroidery patterns are not included. Embroidered designs shown in the photos are examples only.

Frame Details

Small frame

  • Overall size: 11 × 11 cm / 4.4 × 4.4 in
  • Stitching area: Approx. 8 × 8 cm / 3.1 × 3.1 in
  • Approximate stitch count: 37 × 37
  • Thickness: 5 mm / 0.2 in
  • Approximate filament use: 25 g per frame
  • Approximate print time: 2h 25min

Medium frame

  • Overall size: 16 × 16 cm / 6.3 × 6.3 in
  • Stitching area: Approx. 11 × 11 cm / 4.3 × 4.3 in
  • Approximate stitch count: 51 × 51
  • Thickness: 7 mm / 0.3 in
  • Approximate filament use: 53 g per frame
  • Approximate print time: 4h 40min

Large frame

  • Overall size: 23 × 23 cm / 9 × 9 in
  • Stitching area: Approx. 16.4 × 16.4 cm / 6.5 × 6.5 in
  • Approximate stitch count: 77 × 77
  • Thickness: 10 mm / 0.4 in
  • Approximate filament use: 123 g per frame
  • Approximate print time: 10h 20min

All three sizes

  • Grid spacing: Similar to Aida 11 - approximately 11 stitches per inch
  • Recommended: 3-4 strands of embroidery floss with a size 26 needle
  • Displays: Any orientation
  • Frame construction: One solid frame piece each
  • Supports: Not required

No stand, backing, clip, hanging hole, or extra parts are included.

Print times are approximate estimates from a Bambu Lab P1S and will vary with your printer, slicer, and settings.

Resizing a file resizes the entire grid. It will not add stitches, and the spacing may no longer match Aida 11.

Tested Print Setup

  • Printers: Bambu Lab P1S and Bambu Lab X2D
  • Nozzle: 0.4 mm
  • Slicer: Bambu Studio - settings are pre-loaded in the .3mf files
  • Material: PLA only
  • Filaments tested: Bambu PLA Matte and SUNLU PLA Meta
  • Layer height: 0.2 mm
  • Wall loops: 2
  • Infill: 15%
  • Print orientation: Flat, with the back on the build plate

Personal Use License

You may print these frames for yourself or as personal gifts for family or friends.

You may not sell printed frames, include them in kits or classes, upload or share the files on MakerWorld, Thingiverse, Printables, or any other platform.

Personal-use files include a small GoodStrings text mark on the back of the frame. This mark may not be removed, covered, or altered.

Full license terms: read the Personal Use License.

Don't Have a Printer?

Buy the finished frame, printed and shipped by us:

Cross stitch frame - floral stitchable embroidery frame

Instant Download

Your files are available immediately after purchase. All sales are final once the files have been downloaded.

Trouble opening the link or downloading your files? Message us - we're happy to help.

Pattern Credit

The stitched design shown in the listing photos is not included.

Lemon pattern by maggiejosstudio.com.

View full details